It takes many years to design and build products to perform well in all the conditions farmers around the world face. Often when weather conditions become either very wet or very dry it can take its toll on the machinery. Too wet and the strain on machinery can be enormous; too dry and the ground impact can rattle machines to pieces.
When buying a Kidd Farm Machinery product you can be assured that many years of experience has gone into the design.
Kidd Bale Choppers
Bale Choppers 814, 806 and 807, Straw for Bedding and Mulching. These are a better use of material and labour with less wastage, and gives variable chop length for different poultry beddings. Bedding and Mulching – no problem!
Kidd Bale Shredders
Bale Shredders 450 and 850 easily handles straw, haylage, clamp grass and maize silage. It’s compact but with surprising large capacity for 2 round bales up to 6ft diameter. Material can be directed to exactly where it is needed with less waste.
Kidd has launched a new range of Bale Shredders to compliment the 450 & 850 Bale Shredder range. A new smaller and lighter range of Bale Shredders is now available.
Kidd 850 Bale Shredder
The 330 is the only machine on the market that can be factory built for Shredding or Twin Chopping. Can be converted by a distributor. The shorter chop length can be varied in length. On most other machines it cannot.
- The Chopping mechanism on the 330 can be withdrawn for service and inspection. On other machines they cannot
- All chopping blades on the 330 are protected against stones and other objects
- The 330 is the only machine that will shred or twin chop straw and handle green material
- The unique drum concave design throws less stones
- Chopping on the 330 can be done only on the beater against the concave
- The top bank of knives gives a short chop and reduces process time
- The 330 has an all welded body that will withstand vibration and tractor knocks
- The swivel chute on the 330 is lower get under buildings overhangs
With the increasing demand from end users for a machine that can process straw, hay, silage or haylage with little or no adjustment for feeding, chopping or bedding, the 475T TC – the first of its kind on the market. The 475T TC Bale processor and Straw chopper can handle 2 round bales or 2 big square bales (80cms x 120cms) side by side.
The smart conveyor reduces process time, hang-ups and evens the material flow over the beater, into the chopping mechanism and fan. Crop flow is maximised at all times without blocking or stopping. Set the 475 running and the smart conveyor controls the process – all controlled at the touch of a button!
The 475 will shred and spread un-chopped straw for bedding, or when the chopping mechanism is selected will give an infinitely variable short chop length from 30 – 60mm which is suitable for bedding or a TMR ration.
The 475 bale processor is a versatile machine that can handle all straw types for bedding and feeding and any green material for feeding, it comes with a high capacity fan, heavy duty flails and chopping mechanism, 3 stage swivel chute, in-cab electric controls, wide angle PTO and smart conveyor.
Kidd Post Drivers
TWY 340 Post Driver Range. Manual or hydraulic control or part manual or part hydrualic. Swing to either side of the tractor. Adjustable mast 200KG taper weight. Adjustable post calliper. Hyd top link.
Available from Chandlers Belton, Horncastle, Spilsby, Holbeach, Barnack, Lutterworth, Shefford, Wallingford, Cirencester, Devizes, Bristol and Southam depots.